• Customer Support Portal
  • +1.800.267.0730
  • info@dkl.com
DataKinetics
  • Home
  • Solutions
  • Services
  • News & Events
  • Company
    • Resource Center
    • Careers
  • Contact
Select Page
  • Notices
  • Preface
    • Audience for this Guide
    • What is Covered in this Guide
    • Version 7 Installation – What’s New
    • Naming protocol
    • Glossary
    • Conventions used in this guide
    • Additional tableBASE references
    • Customer Support
    • Training and Professional Services
    • About DataKinetics
  • Installation overview
    • Installation Procedures
  • Preparing for Installation
    • Step 1: Prepare for tableBASE installation
    • Step 2: Obtain installation files from installation media
    • Step 3: Verify recommended security considerations
  • Installing the tableBASE PC Server
    • Steps to install the tableBASE PC Server
      • Step 1: Move load modules to authorized load library
      • Step 2: Modify PROC and Install in PROCLIB
      • Step 3: Start the tableBASE PC Server
  • Installing tableBASE MVS batch
    • Steps to install tableBASE Batch
      • Step 1—Modify default parameters (optional)
      • Step 2—Copy tableBASE load modules
      • Step 3—Run tableBASE interface above the line
      • Step 4—Add recommended modules to LPA (optional)
      • Step 5—Convert tableBASE libraries to Version 6 format (optional)
      • Step 6—Point TBDR CLIST to newly installed libraries
      • Step 7—Update binder procedure to use the current TBLBASE API
      • Step 8—Convert BDAM table libraries to VSAM (optional)
      • Step 9—Confirm successful install
  • Installing the VTS (Virtual Table Share) product
    • Steps to install the VTS product
      • Step 1—Modify default parameters (optional)
      • Step 2—Copy tableBASE load modules (optional)
      • Step 3—Confirm successful VTS install
  • Installing the VTS Gate product
    • Steps to install and validate the VTS Gate product
      • Verify VTS Gate license
      • Read-only VTS-TSR start up and validation
      • Hardware key protected VTS-TSR start up and validation
      • SAF interface protected VTS-TSR start up and validation
  • Installing the CICS Interface product
    • Differences between tableBASE Release 5.x and newer releases
    • Steps to install the CICS Interface product
      • Step 1—Modify default parameters (optional)
      • Step 2—Copy tableBASE load modules (optional)
      • Step 3—Convert from BDAM table libraries to VSAM (optional)
      • Step 4—Create CICS definitions for tableBASE libraries
      • Step 5—Create CICS definitions for tableBASE programs and transactions
      • Step 6—Create CICS definitions for tableBASE journal files
      • Step 7—Edit PLT
      • Step 8—Update binder procedure to use new TBLBASE API
      • Step 9—Customize CICS startup JCL
      • Step 10—Confirm successful CICS Interface install
      • Step 11—Change system abends to task abends
    • Notes and restrictions
      • Level of CICS
      • CICS/TS CSD
      • FCT restriction for tableBASE libraries
  • Installing the IMS TM Interface product
    • Differences between Release 5.x and Version 7 affecting IMS
    • Steps to install the IMS/TM Interface product
      • Step 1—Modify default parameters (optional)
      • Step 2—Copy tableBASE load modules (optional)
      • Step 3—Check pre-load list
      • Step 4—Customize IMS startup JCL
      • Step 5—Confirm successful IMS Interface install
  • Installing the DB2 Stored Procedures Interface product
    • Steps for DB2 Stored Procedure support
      • Step 1—Modify default parameters (optional)
      • Step 2—Copy tableBASE load modules (optional)
      • Step 3—Customize startup JCL
  • Installing the tablesONLINE/CICS product
    • Steps to install tablesONLINE/CICS
    • Installing tablesONLINE/CICS for the first time
      • Step 1—Copy the tablesONLINE control libraries
      • Step 2—Customize CICS startup JCL
      • Step 3—Enable batch job submission from CICS—Part 1
      • Step 4—Create CICS definitions
      • Step 5—Confirm successful tablesONLINE install
      • Step 6—Enable batch job submission in CICS—Part 2
      • Step 7—Change Fetch Generic Delimiter (optional)
      • Step 8—Validate tablesONLINE/CICS Administration
    • Upgrading tablesONLINE/CICS from Release 4.2.x, 5.0.x, or 5.1
      • Upgrade 1—Create new TBACTLB library
      • Upgrade 2—Create new TBDICLB library
      • Upgrade 3—Create new TBAPPLB library
      • Upgrade 4—Update description tables
      • Upgrade 5—Update menu tables
      • Upgrade 6—Update message tables
      • Upgrade 7—Update help table
      • Upgrade 8—Update security module (optional)
    • Notes and restrictions
      • CICS/MRO or CICS/ISC
      • Converting Views
      • TWA size for tablesONLINE/CICS transactions
      • Generating C/C++ structures from tablesONLINE Views
  • Installing the tablesONLINE/ISPF product
    • Steps to install tablesONLINE/ISPF
      • Step 1—Change CLIST to variable blocked file (optional)
      • Step 2—Point TBALLOCS CLIST to newly installed TBSYSLB
      • Step 3—Point TBSKDEF SKELETON to newly installed load library
      • Step 4—Modify the primary ISPF menu to point to tablesONLINE
      • Step 5—Modify Help tutorial to point to tablesONLINE help
      • Step 6—Connect tablesONLINE to ISPF
      • Step 7—Confirm successful tablesONLINE/ISPF install
    • Notes and restrictions
      • Operating considerations and limitations
      • Generating C/C++ structures from tablesONLINE Views
  • tableBASE run-time options
    • ALLOW_TB_LIB_IO—Allow tableBASE Library I/O
    • CICSJRNL—CICS Journal File ID
    • DATERTNX—Date-Sensitive Processing Found Code
    • FGDELIM—Fetch Generic Delimiter
    • HASH_HI_DEN_LIM—High Density Limit for Hash Indexes
    • HASH_LOW_DEN_LIM—Low Density Limit for Hash Indexes
    • LDS—Linear Data Set Use
    • LIBnn, ML—tableBASE Library List
    • LISTOPTIONS—List Parameter Options
    • LOCKTIMERC—Lock Timer Wait Value
    • LOCKTIMEWTO—Lock Timer Message Wait Value
    • MAXNMTAB—Maximum Number of Tables
    • MTRETAIN—Retain Rows and Index Areas
    • MULTITASKING—Multitasking
    • MULTOPNX—Multiple Alternate Index
    • OVRRIDES—Allow Changes to Status Switches
    • RACF_LIBACCESS—Perform Checks on Protected Libraries
    • RACF_VTS—Perform Checks on SAF Interface Protected VTS-TSRs
    • STROBE—Strobe Interval
    • STROBEMETHOD—Strobe Method
    • SUPPRESS_DUMPS—Suppress tableBASE Messages and Dumps
    • SWITCHES—Status Switches
    • TABLEWAITRC—Table Open Enqueue Wait Time
    • TABLEWAITWTO—Table Open Enqueue Report Time
    • TPVM—VTS Group Manager Use
    • TSR_ALGORITHM—Optimize TSR Usage
    • TSR_KEY_PROTECT—Hardware Key Protection for VTS-TSRs
    • TSR_WARNING_FREQ—Frequency of TSR Allocation Warnings
    • TSR_WARNING_PCT—Percentage of TSR Allocation for Warning Activation
    • TSRACCESS—Read Only (RO) or Read Write (RW) TSR Access
    • TSRSIZE—tableSPACE Region Size
    • USEREXITS—User Exits
    • VTSFIRST, VTSLAST—VTS Search Sequence
    • VTSNAME—Specifying the Name of a VTS-TSR
    • VTSPREFIX—VTS Prefix Definition
    • ZEROROWS—Zero Data Table Rows on De-allocation
  • TBOPT dataset coding
  • Converting tableBASE libraries
    • Description of tableBASE library versions
    • Converting a tableBASE library
    • tableBASE version 5 library expansion limits
    • DK1TLCHK utility
  • tableBASE LPA-eligible programs
  • Source modules
  • JCL members
  • Distribution datasets and libraries
    • Mandatory tableBASE datasets
    • Optional tableBASE datasets
    • Mandatory tableBASE libraries
    • Optional tableBASE libraries
  • Home
  • /
  • Documentation Archive
  • /
  • tableBASE Installation Guide

Installing the CICS Interface product

If you have licensed the tableBASE CICS Interface product, the installation media contains additional load modules in the library:

  • your.prefix.LOAD
Note:
Before you install the tableBASE CICS Interface software, review the information in Installation Procedures.
  • Differences between tableBASE Release 5.x and newer releases
  • Steps to install the CICS Interface product
    • Step 1—Modify default parameters (optional)
    • Step 2—Copy tableBASE load modules (optional)
    • Step 3—Convert from BDAM table libraries to VSAM (optional)
    • Step 4—Create CICS definitions for tableBASE libraries
    • Step 5—Create CICS definitions for tableBASE programs and transactions
    • Step 6—Create CICS definitions for tableBASE journal files
    • Step 7—Edit PLT
    • Step 8—Update binder procedure to use new TBLBASE API
    • Step 9—Customize CICS startup JCL
    • Step 10—Confirm successful CICS Interface install
    • Step 11—Change system abends to task abends
  • Notes and restrictions
    • Level of CICS
    • CICS/TS CSD
    • FCT restriction for tableBASE libraries
Last modified January 17, 2023

Doc navigation

< Installing the VTS Gate product Installing the IMS TM Interface product >