If TBDKUSID has never been customized at your site, no further action is required for this step. As noted at the start of this chapter, once the upgrade steps for your release are complete, continue with Step 2—Customize CICS startup JCL.
- Notices
- Preface
- Installation overview
- Preparing for Installation
- Installing the tableBASE PC Server
- Installing tableBASE MVS batch
- Steps to install tableBASE Batch
- Step 1—Modify default parameters (optional)
- Step 2—Copy tableBASE load modules
- Step 3—Run tableBASE interface above the line
- Step 4—Add recommended modules to LPA (optional)
- Step 5—Convert tableBASE libraries to Version 6 format (optional)
- Step 6—Point TBDR CLIST to newly installed libraries
- Step 7—Update binder procedure to use the current DK1TCALL API
- Step 7—Update binder procedure to use the current TBLBASE API
- Step 8—Convert BDAM table libraries to VSAM (optional)
- Step 9—Confirm successful install
- Steps to install tableBASE Batch
- Installing the VTS (Virtual Table Share) product
- Installing the VTS Gate product
- Installing the CICS Interface product
- Differences between tableBASE Release 5.x and newer releases
- Steps to install the CICS Interface product
- Step 1—Modify default parameters (optional)
- Step 2—Copy tableBASE load modules (optional)
- Step 3—Convert from BDAM table libraries to VSAM (optional)
- Step 4—Create CICS definitions for tableBASE libraries
- Step 5—Create CICS definitions for tableBASE programs and transactions
- Step 6—Create CICS definitions for tableBASE journal files
- Step 7—Edit PLT
- Step 8—Update binder procedure to use new DK1TCALL API
- Step 8—Update binder procedure to use new TBLBASE API
- Step 9—Customize CICS startup JCL
- Step 10—Confirm successful CICS Interface install
- Step 11—Change system abends to task abends
- Notes and restrictions
- Installing the IMS TM Interface product
- Installing the DB2 Stored Procedures Interface product
- Installing
the tablesONLINE/CICS product
- Steps to install tablesONLINE/CICS
- Installing tablesONLINE/CICS for the first time
- Step 1—Copy the tablesONLINE control libraries
- Step 2—Customize CICS startup JCL
- Step 3—Enable batch job submission from CICS—Part 1
- Step 4—Create CICS definitions
- Step 5—Confirm successful tablesONLINE install
- Step 6—Enable batch job submission in CICS—Part 2
- Step 7—Change Fetch Generic Delimiter (optional)
- Step 8—Validate tablesONLINE/CICS Administration
- Upgrading tablesONLINE/CICS from Release 4.2.x, 5.0.x, or 5.1
- Notes and restrictions
- Upgrading tablesONLINE for Release 6.0.0, 6.0.1, or 6.0.2
- Upgrading tablesONLINE for Release 6.1.1
- Notes and restrictions
- Installing
the tablesONLINE/ISPF product
- Steps to install tablesONLINE/ISPF
- Step 1—Change CLIST to variable blocked file (optional)
- Step 2—Point TBALLOCS CLIST to newly installed TBSYSLB
- Step 3—Point TBSKDEF SKELETON to newly installed load library
- Step 4—Modify the primary ISPF menu to point to tablesONLINE
- Step 5—Modify Help tutorial to point to tablesONLINE help
- Step 6—Connect tablesONLINE to ISPF
- Step 7—Confirm successful tablesONLINE/ISPF install
- Notes and restrictions
- Steps to install tablesONLINE/ISPF
- tableBASE run-time options
- ALLOW_TB_LIB_IO—Allow tableBASE Library I/O
- CICSJRNL—CICS Journal File ID
- DATERTNX—Date-Sensitive Processing Found Code
- FGDELIM—Fetch Generic Delimiter
- HASH_HI_DEN_LIM—High Density Limit for Hash Indexes
- HASH_LOW_DEN_LIM—Low Density Limit for Hash Indexes
- LDS—Linear Data Set Use
- LIBnn, ML—tableBASE Library List
- LISTOPTIONS—List Parameter Options
- LOCKTIMERC—Lock Timer Wait Value
- LOCKTIMEWTO—Lock Timer Message Wait Value
- MAXNMTAB—Maximum Number of Tables
- MTRETAIN—Retain Rows and Index Areas
- MULTITASKING—Multitasking
- MULTOPNX—Multiple Alternate Index
- OVRRIDES—Allow Changes to Status Switches
- RACF_LIBACCESS—Perform Checks on Protected Libraries
- RACF_VTS—Perform Checks on SAF Interface Protected VTS-TSRs
- STROBE—Strobe Interval
- STROBEMETHOD—Strobe Method
- SUPPRESS_DUMPS—Suppress tableBASE Messages and Dumps
- SWITCHES—Status Switches
- TABLEWAITRC—Table Open Enqueue Wait Time
- TABLEWAITWTO—Table Open Enqueue Report Time
- TPVM—VTS Group Manager Use
- TSR_ALGORITHM—Optimize TSR Usage
- TSR_KEY_PROTECT—Hardware Key Protection for VTS-TSRs
- TSR_WARNING_FREQ—Frequency of TSR Allocation Warnings
- TSR_WARNING_PCT—Percentage of TSR Allocation for Warning Activation
- TSRACCESS—Read Only (RO) or Read Write (RW) TSR Access
- TSRSIZE—tableSPACE Region Size
- USEREXITS—User Exits
- VTSFIRST, VTSLAST—VTS Search Sequence
- VTSNAME—Specifying the Name of a VTS-TSR
- VTSPREFIX—VTS Prefix Definition
- ZEROROWS—Zero Data Table Rows on De-allocation
- TBOPT dataset coding
- Converting tableBASE libraries
- tableBASE LPA-eligible programs
- Source modules
- JCL members
- Distribution datasets and libraries
- Home
- /
- Documentation Archive
- /
- V 7.0.0 tableBASE Installation Guide
- /
- Installing the tablesONLINE/CICS product